DL /SN /JSL 03/10/2008

Project Meeting

Microstim load Tester
Agreed that John would find time to do this, See Issue 15550

Pico Scope,
 Possibly we are using it wrong , or its simply not accurate enough as results can be manipulated to produce results,
 could also be possible it doesnt like new computers, currently waiting for a reply See Issue 15552

V1000
 Calibration Check problem,
 Peter never finished the project.

 DL, Feotal Heart Monitor Calibrated, would need testing once a year tracable to namas - Rejected.

 SN Quality of the wave form a concern - No real way of testing.

Engineers currently ask 1/ For proof the unit is doing what it says its doing,
			2/ a 12 monthly calibration check certificate


End Concencous:
	SN will order Scope, Parts for  the optics / Counter are in the project room - jsl

Oxygen Monitor,
 SN is waiting for bernt to provide  New Prototype of the oxygen monitor

Cables that have been agreed with JSL are destined for Vandagraph.

JSL / SN both agree there is no Fixed commitment to specification and or specific parts.

Sensor : no current commitment, although for speed of getting product to market suggestion was to use R-17 Sensor rebadged as a R-47 (example numbers only), so in the future we can add a chip to the sensor and future versions on monitor can then only use the r-47 (example number only)

SN: going forward to
	1/ Portable O2 monitor for Viamed Use
	2/ Unit for sale to Teledyne
	3/ Desktop unit.

JSL: will not be putting an Oxygen Monitor in front of Teledyne

	Current commitments to william, NONE (jsl / sn)

JSL Re-States that SN / DIL need to see Teledyne at least once a Year.

Teledyne Feedback on Smart sensor is they are able to use the  sample 3 pole cable which fits the R-17, with a Chipped Oxygen Sensor,
Again currently there have been no commitments made to teledyne with regard chipped sensors.

JSL :  Has no problem if we were to utilise a T-7 style Cable.
 	The initial choice was down to cost.

SN/JSL discussed various types of Oxygen Monitor case and the need for 2 different pcb layouts for the desktop unit to the portable handheld unit.

Saadat:
	JSL commitment to Ali to provide him with a  viamed labled product to sell to the middle east,
	Ali was originally going to be the one to buy and sell the unit, but has since taken a position in Saadat so is no longer in a position to sell the units.

Currently there is no Direct End Game Plan, JSL not sure the units would sell in the UK or the EU but should be able to find a market back in the middle east.